Creative BLASTER PC M004, Руководство пользователя

Страница: 34 / 70

4-4 Connectors
IR Connector (JP4)
You can attach a 5-pin infrared device cable to the JP4 IR connector
from an infrared receiver in order to use the infrared transfer function.
The M004 motherboard meets ASKIR and HPSIR specifications. It is
also fully compatible with Creative’s infrared receiver for a wireless
interface. The Creative infrared receiver re-routes commands it
receives from the credit card-sized Creative iNFRA Remote controller
to the COM2 serial port of the host computer.
Use the CMOS Setup Utility to enable the infrared receiver. For
details, see the section “Integrated Peripherals” on page 6-20.
Figure 4-4 shows JP4’s pin assignment and location..
CPU, Chassis & AGP cooling FAN connectors (JP29, JP28, J43
and J47)
The motherboard provides three onboard 12 V cooling fan power
connectors for the CPU (JP28 and JP29), Chassis (J43) and AGP
device (J47) cooling fans. Depending on the fan’s manufacturer, the
wiring and plug type may be different. The red wire should be
connected to +12 V and the black wire should be connected to ground
(GND).
Figure 4-4: JP22’s pin assignment and location.