Creative BLASTER PC M004, Руководство пользователя

Страница: 22 / 70

2-8 The Pentium® II Processor
Step 3: To mount the Pentium II processor
1. Push the latches on the processor toward the center of the
processor until they click into place (see Figure 2-12).
2. Hold the processor so that the fan shroud is facing toward the
HSS base on the motherboard.
3. Slide the processor into the RM. Ensure that the alignment
notch in the processor fits over the plug in Slot 1.
4. Push the processor down firmly, with even pressure on both
sides of the top, until it is seated.
5. Push the latches on the processor outward until they click into
place in the RM.
The latches must lock into place to ensure proper
electrical connectivity of the processor.
6. Slide the HSS top on the supports forward to clip onto the HSS
base through the fins of the heat sink.
7. Depending on the type of the Fan/Heat Sink power cable,
attach the end of the power cable either to the three-pin
connector on the motherboard or to the power cord of the ATX
power supply.
Figure 2-12: Mounting the Pentium II processor.