Memory Configuration and BIOS Settings 6-23
Onboard FDC
Controller
Specifies the onboard floppy disk controller (FDC). This
setting allows you to connect your floppy disk drives to
the onboard floppy connector. If you have a separate
control card, select Disabled for this item.
Onboard
Serial Port 1
Sets the onboard serial port 1 to 3F8/IRQ4, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3, Auto or Disabled.
Onboard
Serial Port 2
Sets the onboard serial port 2 as 3F8/IRQ4, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3, Auto or Disabled.
UR2 Mode
The default setting is SBIrDA.
UR2 Duplex
Mode
Specifies whether the onboard infrared transfer mode is
full duplex or half duplex. The default setting is Full for
full duplex.
Onboard
Parallel Port
Sets the onboard parallel port address to 378H, 278H,
3BCH or Disabled.
Parallel Port
Mode
Specifies the onboard parallel port mode. The settings are
SPP (Standard Parallel Port), EPP (Enhanced Parallel
Port), ECP (Extended Capabilities Port), and EPP+ECP.
ECP Mode
Use DMA
Specifies the DMA (Direct Memory Access) channel
when ECP device is in use. The settings are DMA 1 and
DMA 3. This item will not be displayed when SPP or EPP
printer mode is selected.
Table 6-9:
The Integrated Peripherals Screen items.
Item
Description
Содержание BLASTER PC M004
Страница 1: ...TM M004 Motherboard...
Страница 3: ...ii...
Страница 14: ...The M004 Motherboard 1 5 Figure 1 1 The M004 motherboard...
Страница 69: ...Printed in Singapore OBKCOV E CDR BACK COVER OEM ENGLISH...