Creative Playthings WILLIAMSBURG SH 3200-000 Скачать руководство пользователя страница 3

Страница: 3 / 18

WILLIAMSBURG WITH TENT ROOF

19687-100 Rev U (09-20)

Assembly

Page 3

SAFE PLAY AREA

SELECTING THE CORRECT LOCATION FOR YOUR PLAY PRODUCT IS IMPORTANT FOR YOUR

CHILDREN’S SAFETY AND THE PRODUCT’S LONGEVITY.

Play Set Dimensions:

• The Williamsburg play set has ground dimensions of 8'-3" x 12'-7" (Swing Accessories not included).

• The Williamsburg play set requires a level ground surface of 21' x 25' for a Safe Play Area (Swing Accessories not included).

• Additional accessories may increase the size of the Safe Play Area.

• The maximum fall height for your Williamsburg is 60". 7ft Swing beam fall height: 84". 9ft beam fall height: 107".

Safe Play Area:

• The Safe Play Area refers to a zone extending 6' beyond the play set on all sides, including the slide and the space above

the play set. Because children may deliberately jump from a moving swing, the Safe Play Area must be extended to 14

in front of and behind a swinging Accessory.

• The ground surface must be level. Installing your play set on sloping ground can cause it to lean or “rack". This leaning

puts additional stress on all connections and joints and in time will cause those connections to loosen and fail.

• The Safe Play Area must be free of all structures, landscaping, trees and branches, rocks, wires, and other obstacles to

safe play. Children can be seriously injured running, or swinging into these obstacles.

• Remove all tripping hazards from the Safe Play Area. Tripping hazards include; roots, stumps, rocks, landscaping, sprin-

kler heads, railroad ties, plumbing and electrical connections.

• Do not install your play set over concrete, gravel, asphalt, packed earth, or any other hard surface. The following is a list

of recommended ground covers from the Consumer Product Safety Commission.

• Any edging used to contain the ground cover must be beyond the Safe Play Area. (i.e.. Landscape Timbers)

RECOMMENDED GROUND COVER

Suggested Material

Uncompressed Depth

Double Shredded Bark Mulch

Uniform Wood Chips

12"

Fine Gravel

12"

Fine Sand

12"

A FALL ONTO A HARD SURFACE COULD RESULT IN SERIOUS INJURY.

14'

WHICHEVER

IS GREATER

Safe play area using

recommended ground cover.

Landscape Timbers 6' from

play structure.

Содержание WILLIAMSBURG SH 3200-000


















Результаты поиска

Содержание WILLIAMSBURG SH 3200-000

Отзывы:

Похожие инструкции для WILLIAMSBURG SH 3200-000

Бренды по названию

Популярные бренды

Creative Playthings WILLIAMSBURG SH 3200-000, Инструкция по сборке

Результаты поиска

Содержание WILLIAMSBURG SH 3200-000

Отзывы:

Похожие инструкции для WILLIAMSBURG SH 3200-000

Бренды по названию

Популярные бренды