Page 10 of 11
eD S10 www.creativelighting.com.au
Binary Input Objects
The 8 inputs on the eDIDIO can be read. The value is read only and will return the instantaneous reading.
Instance
Property
Read/Write
Present Value = 0
Present Value = 1
0
Input 1 Status (Default high)
R
Input Low
Input High
1
Input 2 Status (Default high)
R
Input Low
Input High
2
Input 3 Status (Default high)
R
Input Low
Input High
3
Input 4 Status (Default high)
R
Input Low
Input High
4
Input 5 Status (Default high)
R
Input Low
Input High
5
Input 6 Status (Default high)
R
Input Low
Input High
6
Input 7 Status (Default high)
R
Input Low
Input High
Binary Output Objects
The 4 eDS10 outputs can be set if they are configured as outputs from the configuration utility.
Instance
Property
Read/Write
Present Value = 0
Present Value = 1
0
Input 8/Output 1
R/W
Output Low
Output High
1
Input 9/Output 2
R/W
Output Low
Output High
2
Input 10/Output 3
R/W
Output Low
Output High
3
Input 11/Output 4
R/W
Output Low
Output High
Schedule Object
An interface between BACNET and the internal eDIDIO schedules is available. To get the most out of the eDIDIO
schedules they will need to be initially configured using the configuration software. This allows for the additional
functionality (Day/Month Mask, Astronomical Time, Large Command List) to be used with times and enable/disable
status set by BACNET.
5 schedule objects are available, mirroring the first 5 of the eDIDIO configuration schedules.
•
Sending Present Value will allow for enable/disable schedule.
•
Sending ‘Weekday Schedules’ with at least 2 times (Start and Stop) will update the start and end times of the
schedule.
