11
3. Install Pneumatic Joint, XE-axis Assembly and Drive Belt
8
8
12
12
X-axis
Profile x 1
XE-axis
Assembly x 1
Install the drive belt
around the pulley.
23
23
Bowden Tube
Connector x 2
32
32
Hexagon Socket
Flat Round Head
Spring Washer
Combination
17
Drive Belt x 1
25
25
Wrenches and
Screwdrivers x 1
17
● Tighten the Bowden tube connector firmly into the Extruder using an open-end wrench.
● Align the bolt head on the XE-Axis Assembly into the hole on the X Axis profile.
● Secure the XE-axis Assembly to the X-Axis Profile with two M4X16 screws. (Insert the
Allen key through the holes on the outer plate).
● Install the Drive belt round the pulley inside the XE-axis Assembly with the toothed side
round the pulley as shown above.
