16
8. Install Filament Holder, Gantry Cover and Extruder Knob
27
14
15
30
16
34
14
Filament Holder
Upright x 1
15
Filament Holder
Pipe and Nut x 1
16
2020 Profile
Cover x 2
34
Extruder
Knob x 1
30
M5T Nut x 2
27
Hexagon Socket
Flat Round Head
Screw M5X8 x 2
● Insert the M5X8 bolts through the holes on the Filament holder upright and loosely attach the T nuts.
● Align the T Nuts in the top profile groove (The flat side faces towards the back of the printer) and
tighten the nuts, the T nuts will turn in the grove as it tightens.
● Attach the filament holder and secure with the plastic nut.
● Place the extruder knob onto the top of the extruder motor shaft and push the profile covers in on
both sides of the top profile.
