Crane Merchant Six 180, Руководство оператора

Страница: 92 / 210

Programming: Test Merchant™ Operators’ Guide
August 2009 86 1810025
Homing the Motors - Motor Status Detail
1. Press until you reach the Main
Menu , then use or to select
Test, and press .
2. In the Test menu, use or
to select Motor Status Detail and
press .
3. In the Motor Status Detail menu, select
the tray where the product spiral with the
motor needing homing is located.
NOTE
In the Tray X menu, the product spirals with
homed motors will be indicated with an “ H ” in
the line adjacent to the spiral number(s.)
4. In the Tray X menu, select the product
spiral number where the motor needing
homing is located.
NOTE
The Tray X menu indicates not only
the homed motor status, but also:
• If spiral is a FIFO group member
• If spiral is coupled with another spiral
• If there is an error present for the spiral
• If spiral is part of a winner combo
• If spiral is a token member
• If spiral is a time of day member
+
_
+
_
Main Menu
Data Recall
5
Diagnostic
Test
Price
Product Configuration
6
Press EDIT to Select
Test
Test Vend
5
Test Vend w/o SureVend
SureVend Detectors
Motor Test Summary
Motor Status Detail
6
Press EDIT to Select
Motor Status Detail
Tray 1
5
Tray 2
Tray 3
Tray 4
Tray 5
6
Press EDIT to Select
Tray 3
101 – H FC – – – – –
5
102 – H –C – – – – –
303 XH – – ERR – –
304 – H – – – – – W –
305 – H – – – – – – T
6
Press EDIT to Select
NOTE
Refer to the figure of “Motor Status Detail Menu Screen” on page 88 and the “Table: Motor Status
Detail Menu Screen” on page 88 (at the end of this procedure) for location of above information
and for more information.