Crane Merchant Six 180, Руководство оператора

Страница: 150 / 210

Program: System Settings Merchant™ Operators’ Guide
August 2009 144 1810025
Set Accept on Low Change
1. Press until you reach the Main
Menu , then use or to select
System Settings .
2. In the System Settings menu, use or
to select Monetary and press .
NOTE
The Accept on Low Change menu selection
is only available when a Coin Mechanism
and/or a Bill Validator are activated. See
“Select the Coin Mechanism” on page 139 and/
or “Select the Bill Validator” on page 143.
3. In the Monetary menu, use or
to select Accept on Low Change and
press .
4. Using the number keys on either keypad,
enter the Accept on Low Change value .
The arrow keys will reposition the cursor.
This value has two purposes:
A. This value tells the merchandiser how
large a bill or coin to accept even though
there is not enough change in the coin mech
to cover all possible paybacks.
For example: enter 01.00. In this case, the
merchandiser will take a dollar bill or coin,
even though there is less than $1.00 worth of
change in the coin mech.
_
_
_
Main Menu
Special Vend Modes
5
Free Vend
Coins In/Out
System Settings
Security Codes
6
Press EDIT to Select
System Settings
Machine Information
5
Clock
Language
Monetary
Data Transfer
6
Press EDIT to Select
Monetary
Card Reader
5
Multiple Vend Mode
Change Without Purchase
Low Change Message
Accept on Low Change
6
= $ 0.00
Accept on Low Change
05.00
# = Backspace, EDIT = Accept
EXIT = Cancel
Entering 05.00 tells the merchandiser to take a five dollar bill even though there is less than
$5.00 worth of change in the coin mech.
NOTE
This could cause a customer to be short-changed. Entering
00.00 means that bills or coins will only be accepted if there
is enough change in the coin mech to cover the payback.