|
-34-
Adjust
√
√
Replace
√
√
√
Spark arresting screen in
muffler
Inspect
√
Clean
√
Replace
√
√
Cylinder Exhaust Port
Inspect
√
Clean
√
Piston and ring
Inspect
√
Replace
√
Fasteners, inclusive of Bolts,
Screws, Nuts
Inspect
√
Tighten
√
Replace
√
Safety Information Label
Replace
√
WARNING
Moving parts can amputate fingers or cause severe
injuries. Keep hands, clothing and loose objects away
from all moving attachments.
Always stop engine, disconnect spark plug, and make
sure all moving parts have come to a complete stop
before removing obstructions, clearing debris, or
servicing unit.
Allow the machine to cool down before performing
maintenance service. Wear gloves to protect hands
from sharp edges and hot surfaces.
Before cleaning, inspecting or repairing the machine,
make sure that engine has been stopped an cooled
down. Disconnect the spark plug to prevent accidental
starting.
NOTICE
SPECIAL TRAINING IS REQUIRED to service and
repair chain saws. This is especially true of chain saw
safety equipment. If your chain saw fails any of the
checks described below take it to your authorized
dealer. When you buy any of our products we
guarantee the availability of professional repairs and
service. If the retailer who sells your saw is not a
authorized service center, ask him for the address of
your nearest service center.
Chain brake and front hand guard
A. Checking brake band wear
Brush off any sawdust, resin and dirt from the chain
brake and clutch drum. Dirt and wear can impair
operation of the brake.
Regularly check that the brake band is at least 0.6 mm
thick at its thinnest point.
B. Checking the front hand guard
•
Make sure the FRONT HAND GUARD is not
damaged and that there are no visible defects such
as cracks.
•
Move the front hand guard forwards and back to
make sure it runs freely and that it is securely
anchored to the clutch cover.
Содержание NT3760
Страница 5: ... 3 Product overview General overview ...
Страница 53: ...WWW CRAFTOP COM ...