|
-26-
•
Allow the chain to cut for you. Exert only light
downward pressure. If you force the cut, damage to
the bar chain or engine can occur.
•
Release the throttle trigger as soon as the cut is
completed, allowing the engine to idle. If you run the
saw at full throttle without a cutting load, unnecessary
wear can occur to the chain, bar and engine.
•
Avoid losing control when cut is complete, do not put
pressure on saw at end of cut.
•
Stop the engine before setting the saw down after
cutting. Switch the engine off before leaving your
chain saw for any length of time.
Basic safety rules
1. Look around you to make sure there are no people,
animals or other objects nearby that might affect
your work, and to make sure that none of the above
might come within reach of your saw or be injured
by falling trees.
Follow the instructions above, but do not use a
chain saw in a situation where you cannot call for
help in case of an accident.
2. Do not use the saw in bad weather, such as dense
fog, heavy rain, strong wind, intense cold, etc.
Working in cold weather is tiring and often brings
added risks, such as icy ground, unpredictable
felling direction, etc.
3. Take great care when removing small branches
and avoid cutting bushes (i.e. cutting many small
branches at the same time). Small branches can be
grabbed by the chain and thrown back at you,
causing serious injury.
4. Check the area around you for possible obstacles
such as roots, rocks, branches, ditches, etc., in
case you have to move suddenly. Take great care
when working on sloping ground.
5. Take the utmost care when cutting through
branches or logs that are in tension. A log or branch
that is in tension can suddenly spring back into its
natural position before or after you cut it. If you
stand on the wrong side or start cutting in the wrong
place it may strike you or your chain saw. This
could make you lose control and cause a serious
accident.
6. Before moving your chain saw switch off the engine
and lock the chain using the chain brake. Carry the
saw with the bar and chain pointing backwards. Fit
a guard to the bar before carrying the saw any
distance.
7. Never put a chain saw down while the engine is
running unless you have it in clear view and the
chain brake is on. Switch the engine off before
leaving your chain saw for any length of time.
Содержание NT3760
Страница 5: ... 3 Product overview General overview ...
Страница 53: ...WWW CRAFTOP COM ...