page 11
11 Light Kit Assembly, 1-light Option.
Remove 3 screws from switch housing cap (
at top
of light kit fitter
).
Locate
BLUE
(or
BLACK
) and
WHITE
wires in
switch housing labeled LIGHT. Remove and
discard plastic that holds these 2 wires together.
Next, locate
WHITE
and
BLACK
wires in light kit
fitter labeled FOR LIGHT.
Connect
WHITE
wire from switch housing to
WHITE
wire from light kit fitter. Connect
BLUE
(or
BLACK
) wire from switch housing to
BLACK
wire
from light kit fitter. Be sure molex connections
snap together completely.
Align holes in switch housing cap with holes in
switch housing. (
NOTE
: The gap on the edge of
the switch housing cap must align with the
reverse switch on the switch housing for the
proper fit.) Re-insert 3 screws that were previously
removed. Securely tighten all 3 screws with a
Phillips screwdriver.
Install bulbs included with light kit.
IMPORTANT
: When you need to replace bulbs,
please allow bulbs and shade to cool down before
touching them.
Remove finial, finial plate and threaded washer
from threaded rod on light kit fitter. Raise shade in
order to guide pull chain through hole at bottom
of shade. Align threaded rod on light kit fitter with
hole in middle of shade and push up gently,
allowing threaded rod to come through hole.
Thread fan pull chain through corresponding hole
in light kit fitter. (
Be sure pull chain does not rub
against bulb during operation
.) Secure shade with
threaded washer.
Do NOT overtighten threaded
washer as glass may crack or break.
Align hole in
center of finial plate with threaded rod, allowing
center pull chain to come through hole in finial
plate, and push up. Thread center pull chain
through hole in finial and re-attach finial.
Do NOT
overtighten finial as glass may crack or break.
Please proceed to Section 12 on the following
page to complete installation.
*For
Model OP211
bulb
switch
housing
motor
housing
molex
connections
light kit fitter
black wire
black wire
white wire
white wire
shade
finial
finial plate
threaded
washer
fan pull chain
switch
housing
cap
