W52
Common Problems
Problem A: Fan Will not Start
Remedies:
1. Check fuse or circuit breaker and replace if necessary
2. Turn off electrical power and check all wire connectors.
3. Check on/off TCS and wall control selector switch. See operation
instructions.
Problem B: Fan is Excessively Noisy
Remedies:
1. Check that all screws in fan assembly are tight and properly seated.
2. Check to make sure mounting bracket is installed properly.
3. Check to make sure light kit and glass reinstalled properly and tight.
4. If wall control is used, insure the wall control is not a transformer or
a variable speed type.
Problem C: Fan Wobbles
Remedies:
1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are screwed firmly into motor.
3. Check the weight of blades. All our blades are weighed on electronic
scales. The weight is marked on the reverse side of the fan blade near
the motor end. All of the blades should be the same weight to prevent
fan from wobbling.
4. A balancing kit is enclosed if needed.
Weight:
The weight of the complete fan, including assembly hardware is 29.6 lbs.
Ground
Black
White
White
Green
Optional
Light
Black
Blue
Light
Switch
Fan
Switch
Black
Figure C
Electrical Connections Continued…
®
MEJOR DISEÑO
Ventiladores de
Wellington
Instrucciones de instalación
Modelos: W52
All manuals and user guides at all-guides.com
