Step 8
Place canopy (3) over downrod (#2). Replace hanging ball, insert hanging
pin through downrod and tighten set screw "C" in hanging ball into small
hole in downrod.
8
Canopy (3)
Motor Housing (5)
Set Screw (C)
Downrod (2)
Ground
Wire
Ball
Screw
Hanging
Pin
Hanging
Ball
Threaded
Set Screw Hole
Step 7
Position downrod so the hole in the downrod aligns with the hole in the
coupling on the motor. Insert safety bolt (S7) through coupling and downrod
and attach nut. Tighten firmly. Tighten set screw "A" against downrod.
Add decorative cover (4) to the top of the fan motor (5) with the three
decorative cover screws (S9). Tighten screws firmly. In addition slide the
decor cover cap (11) over the downrod and snap into decor cover (4).
WARNING:
Failure to completely tighten downrod as described in steps 5 & 7
above could result in the fan loosening and possibly falling.
7
Set Screw (A)
Safety Bolt & Nut (S7)
Motor Housing (5)
Decorative Cover (#4)
Decor cover cap (#11)
Scroll arm (#8)
6
Step 6
Attach scroll arms (#8) to decor cover (#4) with the three decorative cover
screws (S9). Tighten firmly.
Scroll arm (#8)
Decorative Cover (#4)
WARNING:
Do not lift fan by scroll arms.
Decorative Cover Screws(S9)
All manuals and user guides at all-guides.com
