background image

Ground

Black

White

White

Green

Optional Light

Black

Blue

Light Switch

Figure B

17

Electrical Connections

Connect black and blue (if provided) fan wires to black outlet wire. Connect
white fan wire to white outlet wire and green grounding lead wire from the
grounding conductor to the supply circuit (see figure A). Use wire connectors
provided with your fan. No loose strands or loose connections should be
present. After wires have been connected, they must be spread apart so the
green and white are on one side of the outlet box and the black and blue
are on the other side. Turn
splices upward and carefully
push all wiring into outlet
box. For optional wall
control see figure B or
Figure C for alternate wiring.
When wall switches are employed,
switches should be UL listed
for use with ceiling fan.

NOTE:

 Make sure fan on/off switch

is always at "high speed" location if
your fan is controlled by additional
wall switch.

Ground

Black

White

Blue

Black

White

Green

Optional Light

Figure A

Operation Instructions

1. The  sequence of operation for the motor pull/chain switch is OFF-HI-

MED-LOW.

2. Push the slide switch RIGHT for FORWARD, and LEFT for REVERSE

action of the blades.

3. The pull chain switch for the lighting is two positions - ON/OFF.
4. The pull chain switch for the uplighting is on/off. 

NOTE: 

Uplighting takes

3-60W Candelabra bulbs (not included).

16

CAUTION

Even if your fan is mounted with the blades more than 7 feet from the floor, be
careful to avoid placing your raised arms or any object in the path of the blades.

Motor Pull Chain

Light Pull Chain

Slide Switch

Uplight Pull Chain

Screws

Switch Hub

Remove Switch Hub

15

Optional Light Kit Installation

The Wellington light kit is a hub-replacement type light kit. First remove
the hub from the fan by removing the four side screws and unsnapping the
wire harness. Install the Wellington hub-type light kit (WF1 OR WLK1
FOR TCS) - (WF2 OR WLK2 FOR P/C) by connecting the harness and
securing the light kit to the fan by reinstalling the four side screws removed
earlier.

All manuals and user guides at all-guides.com

Содержание K11061























Отзывы: