background image

11

Step 11

Attach canopy (#3) to the
mounting bracket by placing
screws (S2) into slot in canopy.
Twist clockwise to lock
into place. Tighten
screws firmly.

Bottom of Canopy

Screws (S2)

Canopy (3)

Ceiling

12

Step 12

For blade assembly, position blade arm (#6), blade (#10) and blade
ornaments (#7) so that all screw holes are aligned (as shown in figure
below). Using blade screws (S4), insert through top of blade holder,
through blade, and into blade ornament. Tighten securely.

CAUTION:  

Install blade holders to motor only after motor installation is complete.

This will prevent damage to the blade holders which have been carefully balanced.
 IMPORTANT: Remove rubber cushions, saving motor screws for installation.

Blade Screws (S4)

Blade Arm (6)

Blade (10)

Blade Ornament (7)

Motor
Screws (S5)

13

Step 13

5 Blade Installation

Remove rubber cushions, saving motor
screws for blade installation. Using
motor screws (S5) provided, line up
holes from the blade arm with the holes
in the motor housing. Tighten screws
securely.

14

    Step 14

1.  To install the Switch Housing Assembly (#9), locate both modular wiring
plugs (A) and (B). One extends from the mounting plate (E) on bottom of
fan body and one extends from the Switch Housing (#9). Align the two
plugs so the latch on the side of the plugs will engage when pushed together.
Push the two plugs firmly together until latched.

2.  Locate switch housing screws (S10). Raise switch housing cover (#9) and
align the mounting holes with the holes on mounting plate (E). Once the
holes are aligned, attach the switch housing cover using the switch housing
screws (S10) and tighten firmly.

IMPORTANT:

 

Be sure that no wires are caught in mounting slots or pinched between

switch housing and mounting plate.

CAUTION

To reduce the risk of personal injury, DO NOT bend the blade arms when
installing them. When balancing the blades, or cleaning the fan, do not insert
foreign objects in between rotating fan blades.

Modular Wiring Plug (A)

Mounting Plate (E)

Modular Wiring Plug (B)

Switch Housing (9)

Screws (S10)

Mounting Slots (D)

All manuals and user guides at all-guides.com

all-guides.com

Содержание K11061























Отзывы: