CPS SCH Series, Инструкция по установке и эксплуатации

Страница: 26 / 116

22
(3) Install the Main Inverter Enclosure. Tool required: No. 2 Phillips
head screwdriver.
First remove the cover plate on the right of the main enclosure.
Reserve the screws and cover (
Figure 3-10 ) .
Figure 3-10 Remove the cover of Main Enclosure
Following method A or B mount the main enclosure by aligning the
mark on the top of the main unit with the opening of the wall bracket
( Figure 3-11 ), setting the main enclosure in the track.
A. Lift mounting: find the lifting eye bolt M10 (2pcs) in the Accessory
Kit and screw them into the studs at the top of the inverter. Use
sling rope or bar (inserted through both lifting eye bolts) to lift the
inverter onto the bracket. The minimum angle between the two
sling ropes should be less than 90 degrees ( Figure 3-11 ).
CAUTION:
The main enclosure of the CPS SCH100KTL-DO/US-600 and
SCH125KTL-DO/US-600 inverters is approx. 55kg (121 pounds).
Ensure the mounting bracket is properly installed before hanging
the inverter on the bracket. It is recommended to have at least 2
people to mount the inverter due to the weight of the equipment.