CPI S4UIA, Инструкция по установке и эксплуатации

Страница: 71 / 92

M
AINTENANCE
D
OC
.01040087 R
EV
.6
6-5
Table 6-3. Recommended Test Equipment
Item Description
Example
(Equivalent may be substituted)
1(1) Swept Signal generator, capable of CW and
swept operation, compatible with Scalar
Analyzer, item 2. HP 8360, 8350
2(1) Scalar Network Analyzer, complete with dual
detector probes. Should have dual markers, with
delete mode. Compatible with Swept Signal
Generator, item 1. HP 8757
3(1) Vector Network Analyzer HP 8720D
4(2) Microwave Frequency Counter HP5340A
5 RF Splitter, precision 2 way, 50 Ohms, Type N,
DC to 18 GHz HP 11667A
6 RF Power Meter complete with power sensors,
Type N, 50 Ohms, power measurement range
-30 to +20 dBM HP 437B, 438A meter
HP 8481 sensor
7 Variable Attenuator, 0 to 25 dB, DC to 18 GHz,
50 Ohms Merrimac ASM 25-11K
8 High quality, low loss RF test cables as required
for test set up
9 RF Radiation Detector Narda 8718 meter with 8621 probe
10 Calibrated Waveguide Directional Coupler Narda, HP, etc.
11 Dummy Load, 1 kW Waveline, Narda, etc.
Table 6-3 Notes:
1.
Items 1 and 2 are replaceable by item 3.
2.
Item 3 is replaceable by items 1 and 2.
3.
Item 4 is required only if item 1 is not digitally controlled or phase locked.
6.3 Operator’s Preventative Maintenance
WARNING! OPERATORS SHOULD NOT REMOVE COVERS WITH ELECTRICAL
HAZARD INDICATORS. ONLY SERVICE TECHNICIANS SHOULD REPAIR,
REPLACE, OR PLUG IN PARTS.