O
PERATION
5-14
D
OC
.01040086
R
EV
.7
5.3.5.8 Time
The amplifier internal clock and date can be set in TIME. The operator uses the left or right
arrow keys to select a field and modifies that field using the up or down arrow keys. The
operator does not need to press ENTER for the change to take place.
Figure 5-18. Time Screen
5.3.5.9 IP
Configuration
The
“IP Setup”
section in the
“Initial Power On and Checkout”
chapter details how to change IP
configuration settings.
5.3.6 Set
Power
Press the SET PWR key to enter the set power menu. In SET PWR the attenuation, RF setpoint,
and power mode can be changed. Figure 5-19 displays a typical set power screen.
Figure 5-19. Typical Set Power Screen
5.3.6.1 Changing Attenuation
To change the attenuation, use
UP
/
DOWN
arrows to select the attenuation field and
LEFT
/
RIGHT
keys to change the value. The attenuation is adjustable in increments of 0.1dB.
To return to the main screen, press the
SET
POWER
key again.
Manually changing attenuation disables the ALC and will only work if the Indoor SSPA is in
local mode.
Содержание S4UIA
