ADVANCED MENU
~
23
~
5) RATE
Set the baud rate of each channel (2400 / 4800 / 9600 / 19200 / 57600 / 115200). For the connected cameras, such as
PTZ and speed dome cameras, etc., please make sure their baud rate setting is the same as the setting here.
7.4 DISPLAY
In this menu list, you can check and change some display settings.
Move to “DISPLAY”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE DISPLAY
CAMERA
DE-INTERLACE
ON
DETECTION
FULL SCREEN DWELL DURATION (SEC)
03
REMOTE
CHANNEL
TITLE
ON
DISPLAY
EVENT
STATUS
ON
ALERT
DATE
DISPLAY
ON
SYSTEM
VGA
OUTPUT
(For Model 4 & 5 only)
1024 X 768
NETWORK
BACKUP
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
HDD INFO
uv
SELECT
s
BACK
t
NEXT
ENTER
EVENT SEARCH
EVENT LOG
The submenu items are described below:
1) DE-INTERLACE
Select to enable or disable “DE-INTERLACE” function (ON / OFF).
2)
FULL SCREEN DWELL DURATION (SEC)
Set the full screen dwell duration time (3 / 5 / 10 / 15 seconds).
3) CHANNEL
TITLE
Select to display the channel title or not (ON / OFF).
4) EVENT
STATUS
Select to display the symbols of the event or not (ON / OFF).
5) DATE
DISPLAY
Select to display the date or not (ON / OFF).
6) VGA
OUTPUT
(For Model 4 & 5 only)
Select the VGA output resolution. There are seven options for your choice:
800 x 600 / 1024 x 768 (default) / 1280 x 1024 / 1440 x 900 / 1400 x 1050 / 1680 x 1050 / 1600 x 1200
7.5 ALERT
In this menu list, you can set alerts for different kinds of situations, such as when HDD is full.
Move to “ALERT”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE ALERT
CAMERA
EXT.
ALERT
ON
DETECTION
INT.
BUZZER
ON
REMOTE
KEY
BUZZER
ON
DISPLAY
VLOSS
BUZZER
ON
ALERT
MOTION
BUZZER
ON
SYSTEM
ALARM
BUZZER
ON
NETWORK
HDD
BUZZER
ON
BACKUP
ALARM DURATION (SEC)
05
HDD INFO
HDD NEARLY FULL (GB)
05
EVENT SEARCH
EVENT LOG
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
uv
SELECT
s
BACK
t
NEXT
ENTER
