Use and Care Manual
10/11
Step 6:
Step 3:
Step 4:
Step 5:
•
Use the bolt to attach the backrest bracket to the actuator and secure with the split pin.
A: Connecting rod
B: Fork
C: Flat head rivet
D: Split pin
Step 7:
Step 8:
Wellness for Home
•
Connect backrest heater wire and seat vibration wire.
Seat vibration wire
Backrest heater wire
•
Put away the component carton and take all the parts out from it. Put the remote controller
into the pocket of left arm.
•
Remove the bolt and split pin from the backrest actuator and set aside.
•
Attach the backrest to the seat base.
DO NOT rest it on the floor vertically otherwise
damage to the backrest will occur
. Make sure that the seat is at its most upright position when
resting the pivot pins to the cradle points on the seat base.
•
Connect the air hose and backrest cable (black and grey).
Air hose
Backrest cable
