Use and Care Manual
16/17
Wellness for Home
Lv5” in cycle.
When Kneading function is engage, every single press on this button will change the massage
strength interval in the sequence of “Lv1 > Lv2 > Lv3 >Lv4 > Lv5” in cycle.
Note: When massage function RELEX, RELIEF, THERAPY, FULL AIR, MANUAL AIR or
MANUAL MASSAGE is engaged, every single press on the SPEED or INTENSITY buttons
can adjust the massage speed, strength or air pressure.
14. SPOT/PARTIAL
The Spot or Partial Back massage
Press this button once to activate localized Spot Massage while the original massage mode
continues to run at the latest position. Every single press on this button will change the
massage function in the sequence of “SPOT＜PARTIAL＜STOP” in circle.
Note:
Partial Massage will take the latest position as the center to perform Partial Massage
with the distance approx. 8 cm. SPOT/PARTIAL button is only effective under MANUAL
MASSAGE mode. SPOT function cannot achieved while ROLLING function is activated.
15/16. UPWARD/DOWNWARD ADJUSTMENT
The position adjustment button for spot and partial massage.
When the spot and partial massage function are activated, this button can be used to move the
massage rollers.
Hold this button to move the massage rollers upward/downward respectively. Release the
buttons when reaching desired position.
17/18. WIDTH
The Width Adjustment Button for Tapping, Clapping, Shiatsu and Rolling function.
When Tapping, Clapping, Shiatsu or Rolling function is engaged, every single press on these
two buttons can adjust the massage width into Narrow or Medium or Wide.
19. FULL AIR
The auto full body air function start/stop control button.
Press this button to activate a full body air pressure massage. Press the button again to cease
the function.
Note: Once press Manual Air button, it will switch from Full Air function to
Manual Air function.
6. CHAIR RECLINE AND RESTORE
Keep pressing or to comfortably lay flat or restore the chair to its original position.
Full body Auto massage program
7. RELAX
8. RELIEF
9. THERAPY
10. LED LIGHTING
LED Lighting Function Start/Stop Control Button
Press this button to activate LED lighting function on. Every single press on this button will
change the colors of LED lighting in the sequence of Blue > Green > Red > auto circle of
“Blue>Green>Red>Close”.
Note:
The Auto Program of Relax, Relief and Therapy are preset one LED background color,
and you can also adjust the LED color by pressing the LED button. When the controller is on
“OFF” status, LED lighting also can work.
11. MANUAL MASSAGE
KNEADING, SWEDISH, TAPPING, SHIATSU, CLAPPING, ROLLING
Press this button to activate rhythmic kneading manual massage function for a full back
massage at direction one. Every single press on this button, manual massage function will
change in the sequence of “KNEADING＞SWEDISH＞TAPPING＞SHIATSU＞CLAPPING＞
ROLLING＞STOP” in circle.
12. MASSAGE DIRECTION
When KNEADING, SWEDISH, TAPPING, SHIATSU or CLAPPING massage function is
engaged, press this button to change the rhythmic mode between direction 1 and direction 2.
13. SPEED
The Speed Adjustment Button for Kneading，Tapping, Clapping, Swedish and Shiatsu
function.
When Tapping, Clapping, Swedish or Shiatsu function is engaged, every single press on this
button will change the massage speed interval in the sequence of “Lv1 > Lv2 > Lv3 >Lv4 >
M
