COWIN.FA PLUSTEP-P, Руководство пользователя

Страница: 7 / 29

4. PluStep-P driver specification and size
4-1) Driver Specification
PSM-2832 PSM-2845 PSM-2852 PSM-4233 PSM-4247 PSM-4260 PSM-5641 PSM-5656 PSM-5676 PSM-6045 PSM-6056 PSM-6088
PSD-2832 PSD-2845 PSD-2852 PSD-4233 PSD-4247 PSD-4260 PSD-5641 PSD-5656 PSD-5676 PSD-6045 PSD-6056 PSD-6088
Input voltage
Current
consumption
Temperature
Humidity
Vibration
Rotational
speed
Maximum
input frequency
Protective
function
LED display
Imposition
setting
POSITION GAIN
Pulse input
method setting
Motor rotational
direction setting
Speed/position
control
command
Input signal
Input,
output
Output signal
Functions
1 – 16 (set by rotary switch)
1 clock, 2 clock DIP switch setting
Abnormalities such as overheating, low voltage, over-speed, speed difference, over-current
Power supply (Green), alarm (Red), Inposition (Orange), Servo On (Blue)
0 – 15 (set by rotary switch)
Encoder signal (A+, A-, B+, B-, Z+, Z-) (Output through relevant AM26LS31)
Motor rotational direction setting by DIP switch
Pulse input (Photo coupler)
Servo on / off, alarm reset, position command pulse (Photo coupler)
Alarm out, imposition out (Photo coupler)
24VDC ±10%
Applicable motor
Driver type
Environ
ment
500KHz (duty50%)
500, 800, 1000, 1600, 2000, 2500, 3600, 4000, 5000, 6400, 7200
10000, 16000, 20000, 32000, 40000 (set by rotary switch)
Maximum 1A (excluding motor current)
In use: 0 ~ 50 °C, In storage: -20 ~ 70 °C
In use: 35 ~ 85 % RH, in storage: 10 ~ 90 % RH
0.5G
0 ~ 3,000RPM
Resolution
5 WWW.COWINFA.COM