COULTER HmX Hematology Analyzer, Справочное руководство

Страница: 29 / 128

PN 4237523A 2-1
2 2
INSTALLATION
2.1 GENERAL
Your instrument is tested before it is shipped from the factory. International symbols and
special handling instructions on the cartons tell the carrier how to handle this electronic
system.
Carefully inspect all cartons when they arrive. If you see any sign of mishandling or damage,
file a claim with the carrier immediately. If the system is insured separately, file a claim with
the insurance company.
2.2 SPECIAL REQUIREMENTS
The system is intended for installation and operation in a conventional clinical laboratory
setting. Because the components are interrelated, you must determine the system location and
layout before your local Beckman Coulter Representative arrives to install the system.
Consider the following special requirements.
Space and Accessibility
In addition to the space required for the individual components and their interconnection,
consider:
r
Comfortable working height.
r
Access to the rear of the system for maintenance and service. Allow:
t
30 cm (12 in.) behind
t
30 cm (12 in.) on the sides.
Electrical Input
This system requires:
r
An independent protected circuit.
r
A ground path capable of carrying the full current of the circuit (confirmed third-wire,
earth ground).
r
A female outlet:
t
For the 110/120 V, 60 Hz model, it needs to furnish 120 ±10 Vac, 60 Hz, 15 A,
single-phase input power.
t
For the 220/240 V model, it needs to furnish 220/240 ±10 Vac, 50/60 Hz, 8 A,
single-phase input power.
CAUTION Possible system damage could occur if you improperly uncrate the system, install it, or set it up.
Keep the system in its packaging until your Beckman Coulter Representative uncrates it for installation and
set up.