ChargePoint® Charging Stations
4-8
Step 7 - Install access panel
Using a T25 Torx driver, turn the four
screws in the access panel box
counter-clockwise fully to position its
rear brackets vertically, as shown.
Insert the access panel into the
corresponding opening (top first) above
the head assembly, as shown, and
snap into place. Turn the screws
clockwise to move the brackets
horizontally. To ensure a tight seal,
press the access panel upwards while
tightening the screws until secure.
Rear view of access panel
Turn all four
screws
clockwise to
position the
brackets
vertically
Insert the
access panel
top first
