Installing the Bollard Mount
2-5
Step 3 - Remove access panel
TIP !
It is easier to complete this step if the bollard mount is laying down in a horizontal position, held in
place by its original packaging material as shown.
To remove the access panel:
• Remove the access panel’s front cover by pulling the yellow tab (located on the access panel’s front
cover) towards you.
• Using a T25 Torx Driver, turn the four screws on the access panel counter-clockwise to loosen, as
shown.
• Pull the access panel towards you to remove.
Pull yellow tab towards you
Loosen the
four screws
