ChargePoint® Charging Stations
4-2
Step 1 - Check box for correct contents
Head assembly
The ChargePoint
®
Charging Station’s head
assembly ships in a box containing:
• Head assembly
• Front cover plate
• Spare provisioning label (a duplicate
label has been attached to the head
assembly)
IMPORTANT:
Keep the spare
provisioning label for future reference. It
contains critical information that is needed
for system provisioning (see page 4-11).
Coulomb Technologies, Inc.
Order Desc.: CTXXX-zzzzzzzzzzzzzzzz
Serial No: YYWWSSnnnnnn
(MAC 0000:0000:0000:0000)
Provisioning Password 00000
A provisioning label is attached
to the head assembly’s lower
casting. A duplicate label is
included in the shipping box.
This label provides important
information that is needed for
system provisioning.
An FCC label is affixed to the
front of the head assembly’s
cover plate
NOTE:
To complete the installation steps
described in this chapter, you will also need the
following components:
•
the additional front cover plate that is
included in the shipping box for the bollard
mount (see page 2-2).This cover plate does
not include an FCC label.
•
the access panel and its front cover (this is
also included in the shipping box for the
bollard mount and you removed these
components when installing the bollard
mount (see page 2-5).
