Installing the holsters and cable assemblies
3-7
Step 5 - Install filler panel
Slide the filler panel into the body
assembly until it is flush with the top of
cable assembly 2, as illustrated.
NOTES:
• You removed the filler panel when
installing the bollard mount (see
page 2-13).
• Ensure the filler panel is fully seated
and that there is no gap between the
bottom of the filler panel and the top
of the cable assembly. The filler panel
fits tightly and may require extra
downward force to ensure it is fully
seated.
• Do not tighten the filler panel’s
security screws until both the cable
assemblies and the head assembly
has been installed and you’ve verified
that the station is operating correctly
(as described on page 4-5).
