40
AGUADENS
COSMOGAS
6 - OPERATING
Figure 6.15 - domestic hot water flow rate selector
A
020003.01.016
6.9 - Adjusting the domestic
hot water flow rate
The appliance is fitted with a domestic hot water maximum
flow rate adjuster. However, if the appliance is installed in a
geographical area where the temperature of the cold water
is very low, the flow rate of domestic hot water that passes
inside the appliance may have to be reduced. It is therefore
good practice to perform this adjustment:
1.- switch the appliance on;
2.- using the
and
keys, adjust the
temperature of the domestic hot water to 48 - 50°C;
3.- open the domestic hot water tap fully. In the case of a
single lever mixer, the position must be completely on
“HOT”;
4.- wait 3 minutes for the temperature to stabilise;
5 - if the water temperatures too cold, the flow rate must
be reduced via the selector “A” in figure 6.15, until the
desired temperature is reached.
