Cosen C-325NC, Инструкция по эксплуатации

Страница: 23 / 110

GENERAL INFORMATION
Section 2
2-7
2.3 GUIDE TO THE MANUAL
S E C T I O N 1 , 2 , 3 , - - - - - - - 1 0 ,
A P P E N D I X .
The instruction manual is divided into ten sections. Each section contains important information
on how to operate the machine properly. Some of the safety precautions are described at the beginning
of each section. Please read and understand the manual before operating the machine. For other
technical information, please check with the dealer or the manufacturer for further detail.
2.4 DOCUMENTATION
Other than this manual, the manufacturer also provided other related technical documents along
with the machine. Please read through them should there be a need.
II : ONLY FOR MACHINE WITH “CE ” Certificated
2.5 INTRODUCTION
In designing this machine, many measures have been taken to prevent personal injury. However,
there still some risks remaining despite all the measure adopted. We then put protective devices at
those places. Other than the safety hardware mentioned above, we have also put warning labels on the
machine as a reminder to the user and listed all these risks in the manual. We separate all these items
into four categories, Please detail reading manual Section 1 [SAFELY RULES] before operated
machine. We also provide some risk analysis and procedures. The specific precautions for each section
are described at the beginning of each subsection in the later sections.
2.5.1 GENERAL SAFETY INSTRUCTIONS
Your band saw machine is designed to satisfy regulations of the Council Directive on the
approximation of the laws of the Member Stated relating to machinery (89/392/EEC) – Annex I
Essential health and safely requirements relating to the design and construction of machinery. This
section will review the rules on the document, and check the current designs of band saw machines
to be sure they adopt the requirements.
Please read each label carefully as following:
Read all DANGERS to prevent severe personal injury and death