Cosen C-325NC, Инструкция по эксплуатации

Страница: 59 / 110

OPERATING INSTRUCTION
SECTION 4
4-22
Installing a new blade
Step 1 -
Select the most suitable saw blade for your workpiece considering the size, shape and
material.
Step 2 -
Turn on the machine power by switching to ON.
Step 3 -
Switch to manual ( ) mode.
Step 4 -
Press the saw bow up button and elevate the saw bow until the right insert holder is clear of
the front fixed vise (see below picture).
Step 5 -
Turn the tension controller handle from “ ” to “ ” position to release tension.
The idle wheel will then move slightly toward the direction of the drive wheel.
Step 6 -
Open the idle and drive wheel cover.
Step 7 -
Press the Blade Clip device to hold onto the blade. This device makes blade changing easy
and feasible even with only one operator available.