10
c. The time window shows program preset total time. Press -/+ to change program
running time (The scale is 10-59 minutes.), press ENTER after setting.
d. Press “START/STOP” to enter program status. The time starts to count down. When
changing different programs, it will produce beep sound. When the time descends
to zero, the speed slows down and the treadmill stop.
e. During program running, you can press “Speed –“or “Speed +“to change speed, and
press “Incline –“or “I“to change incline. When it comes to the next section,
it will show the initial data of this section.
Customized program setting:
The users can preset the speed, time and record them in the computer for future use,
according to their own needs. There’re 5 sets of user settings and 16 programs per set
in this computer.
1) Customized program setting:
Press “User set” button in ready status for custom
program setting, the light will be on for user setting 1. Press “P+” and “P-” to
choose programs; press “ENTER” to start time setting.
2) TIME SETTING
Before this section of program is set, the initial time is 16 minutes. Otherwise it
shows set time. Press -/+ to change program running time (The scale is 10-59
minutes.), press ENTER to start speed and incline setting of section.
3) Speed and incline setting
a. The dot matrix of section 1 in the LCD starts to twinkle, meaning it’s OK to start
setting. If this program is unidentified, the initial speed is 1KM/H; the initial incline is
0. Otherwise it shows set speed and incline.
Press “speed+ “, “speed-“to choose the speed you want.
Press “ “, “incline-“to choose the incline you want.
Press ENTER after setting, and start next section speed and incline setting.
b. Do the same to set the speed and incline of section 2-16. When the last section is
finished identified and you continued setting by pressing ENTER, the computer will
beep twice to remind you the setting is done.
c. During setting, press START/STOP to exit.
d. Press “user set” to record the data to the computer. The dot matrix shows all speed
data; time window shows total time; incline window shows section one incline data.
e. If you want to delete all customized program setting data, long press “user set”.
f. If all data are preserved, press START/STOP to operate these set programs. Press
“user set” to back to ready status.
Customized Program Operation
