UT
Handbook for Use and Maitenance – 50000 WB-80-87-95
Edition
01/11
Revisione
00
24
50000WB_e111_E.doc
1. Green light which is on when the crane is working correctly.
2. Red light which is on when the load limiting device, connected with the main
boom lifting cylinder, has been activated.
3. Red light which is on when the load limiting device, connected with the knuckle
boom cylinder, has been.
4. Selector for the selection of the controls that are located on the control station
(local control devices) or of the radio remote controls (supplied on demand).
5. Green light which is on when the controls from the radio remote controls have
been activated.
6. Start button which, if connected, can be used to start the truck engine.; The
engine must be started only after the operator is seated in the seat.
7. Emergency button and truck engine stop. The button has to be used in order to
suddenly stop the oil supply to the crane and for shut off the truck engine. The
truck engine must be shut off before leaving the top seat.
8. Horn and push button for the activation of the timer reset. By pushing this
button it will be possible to use the horn and to activate the timer reset system.
9. Hour meter.
Picture 20
1
2
3
5
6
7
9
4
8
