UT
Handbook for Use and Maitenance – 50000 WB-80-87-95
Edition
01/11
Revisione
00
18
50000WB_e111_E.doc
2.3 - STABILIZATION
DANGER OF OVERTURNING
NOTE: Outriggers must be fully extended
before using the crane.
VEHICLES
EQUIPPED
WITH
PNEUMATIC
SUSPENSIONS;
unload
them
completely
before the stabilisation of the crane to avoid
their utilisation during the using of the
crane.
In the rest position, extension of the stabiliser
cross member (supplied as standard) is prevented
by means of a pin, which is removed by rotating
the handle 180° (Picture 12).
After release, activate the
extension by means of the
stabiliser lever and select
the manoeuvre with the
special diverter valve (lever
1) (Picture 13 and 14).
When operator wants to
move the outriggers, lever
3 (located on 1st control
board, picture 13) must be
on
position
“outriggers”
(lever pushed down in
position B).
Picture 13 Outriggers control SX
1
2
3
A
B
Picture 14 Outriggers control DX
1
2
Picture 12
