Placement of valves:
Make inspection and
maintenance simple.
Flywheel
Crankcase
nameplate
Lifting eye
Self-lubricating piston and rider rings:
Made of PTFE to ensure extended service life
Cylinder
nameplate
Packing cartridge body:
Holds the outer and
middle sets of packing.
Packing cartridge adaptor:
Holds the inner oil wiper
ring set and inner packing
Adapter
Oil filter
(Optional)
Oil divider valve assembly:
Ensures each cylinder has the
same amount of lubrication.
Distance piece:
Ensures greater leakage control
Crankcase
inspection plate
Crankshaft journal, connecting rod
bearings, wrist pins, and crossheads:
Pressure lubricated by an oil pump with oil
filtered by a 10-micron spin on filter.
1/4" Pipe plug
Outer packing set
Middle packing set
Outer distance piece
(Barrier 2)
Inner distance piece
(Barrier 1)
Oil deflector ring
Inner oil wiper ring set
Inner packing set
Heavy-duty crankcase:
A rugged, internally ribbed design,
incorporating heavy-duty main bearings
and four-bolt connecting rods
Variable clearance head:
Allows changing
the capacity and
BHP requirements.
(Optional) Force-feed lubricator:
Assures proper lubrication of
cylinders and packing when required
Heavy-duty cylinder design:
Each cylinder is hydrostatically tested to 1-1/2
times the rated working pressure for maximum
strength. A corrosion resistant coating (MC1002)
is available for all cylinder sizes. MC1002 extends
the life of the cylinder and piston rings.
(Optional) Thermostatically
controlled crankcase heater:
Assures proper oil viscosity
throughout all weather
conditions.
5
