Corghi HD 900, Руководство оператора

Страница: 38 / 182

38 - E
nglIsh
- Operator's manual HD 900
INTRODUCTION
The purpose of this manual is to provide the
owner and operator of this machine with a set
of practical and safe instructions for the use and
maintenance of the wheel aligner.
If these instructions are carefully followed, the
machine will give you the efficient and long-
lasting service that has always characterised
our products, thus making your work consider-
ably easier.
The following paragraphs define the levels of
danger regarding the machine, associated with
the warning captions found in this manual:
DANGER
Immediate hazards that could cause serious
injury or death.
WARNING
Hazards or unsafe procedures that could cause
serious injury or death.
CAUTION
Hazards or unsafe procedures that could cause
minor injury or material damage.
Read these instructions carefully before starting the
equipment. Keep this manual and all illustrative
material supplied with the machine in a folder near
the tyre changer, where it is readily accessible for
consultation by the machine operator.
The technical documentation supplied is consid-
ered an integral part of the machine, and must
always accompany the equipment if it is sold or
transferred to a new owner.
The manual is only to be considered valid for
the machine of the model and serial number
indicated on the data plate applied to it.
WARNING
Comply with the contents of this manual: The
producer declines all liability in the case of ac-
tions not specifically described and authorised
in this manual.
Note
Some of the illustrations in this manual have
been taken from photographs of prototypes; the
standard production model may differ slightly
in certain respects.
These instructions are for the attention of persons
with basic mechanical skills. We have therefore
condensed the descriptions of each operation
by omitting detailed instructions regarding, for
example, how to loosen or tighten the fixing
devices on the machine, etc.
Do not attempt to carry out procedures which
exceed your level of proficiency, or which you
do not have experience with.
If assistance is required, contact an authorised
service centre.