VCX-4402-E Installation and Operating Instructions
Page 9
Saving Configuration
When all the configuration parameters have been entered, they must be saved to memory and the unit
restarted by entering the following command:
Commit
<enter> (please wait a moment until the following prompt appears:)
COMMIT
DONE
Reboot
<enter>
Updating Firmware with TFTP
TFTP is a simple and reliable way of updating the firmware on any device. All that is required is to have
access to a TFTP server which will be used as the host and contain the necessary files. (An example file
name is VCX4402e.ctc).
Via Telnet, enter the following command in order to update the firmware for the device that is being used.
TFTP
<File Name> <Server IP Address>
(File Name is the name of the file which contains the firmware update information. In order to receive the
latest update files, please contact Coretec.)
Here is an example of what a successful update will look like:
This is an example using the 6400E, but the method is the same for the 4402E
This is the command
