VCX-4402-E Installation and Operating Instructions
Page 31
WD
The watchdog is a timer that will perform a complete reset of the device if the firmware encounters a
lockup condition. The parameter is “0” or “1”, where “1” enables and “0” disables the watchdog
function. Enabling the watchdog allows the VCX-4402 devices to recover from some fatal error
conditions without user intervention.
Default:
0
(OFF)
Example Command:
WD 1
(enables watchdog)
AUTOREBOOT
This command permits a periodic timed reboot of the device. The parameter is the number of
seconds between reboots.
Default:
0
(off)
Example:
AUTOREBOOT 3600
AUTOSTART
This command sets a periodic timed restart of the video encoder/decoder. The parameter is the
number of seconds between starts.
Default decoder:
0
(off)
Default encoder:
28800
(8 hours)
Example:
AUTOSTART 3600
300 seconds equals 5 minutes
3600 seconds equals 1 hour
DATE
Example:
DATE [yyyy:mm:dd]
TIME
When entering time, it needs to be typed in in 24 hour notation.
Example:
TIME [hh:mm<:ss>]
JOIN VIDEO MULTICAST
Example
: JVM [1|0]
1=on
0=off
