Core Health & Fitness : 9-8140, Руководство пользователя

Страница: 19 / 28

Page 18
MAINTENANCE MODE - LCD
Maintenance Mode allows access to service and diagnostic information, as well as provides the ability to adjust
certain program default parameters. To enter Maintenance Mode:
1. Press and hold the , and keys together.
2. A beep will sound and “MAINTENANCE MODE” will display momentarily in the Information Window.
3. Release all keys. “SERIAL NO ##### ” will display in the Information Window.
The following keys are available in MAINTENANCE MODE:
Increase and Decrease LEVEL Keys:
Adjust the value of the displayed parameter up
and down, respectively, in increments of 1 unit. These keys do not save the new value -
see OK Key below.
Numeric Keypad: Allows you to enter specific values for numeric parameters. These
keys do not save the new value - see OK Key below.
OK Key:
Updates (saves) the values of all parameters in non-volatile memory, and exits
Maintenance Mode.
NOTE: To exit Maintenance Mode without saving any values or settings, press the QUICK START key.
A complete list of the items that you may display and change in Maintenance Mode:
Item Min Max Default Notes
SN 0 65535 0
Serial Number. Bike serial number (set by
factory).
DSW N/A N/A Vx.xx
Display Software. Display panel software
version number (set by factory). ( V.55
4A72CA5D )
LCB VERS N/A N/A Vx.xx
LCB Software. LCB software version number
(set by factory). ( V2.05 )
UNx N/A N/A ENGLISH
Units. UNE (English) = units of pounds,
miles, feet, inches
UNM (Metric) = units of kilograms, kilome-
ters, centimeters
MAX TIME 5 99 99
Time. Maximum time in minutes allowed
for a program, excluding warm-up and
cooldown.
PD TIME 0 99 ON/OFF