COP DAHUA DHI-VTH2421FW-P, Инструкция по установке

Страница: 5 / 16

5
Before configuring the VTH, it must first be initialised. Follow the on-screen wizard to set an admin password. The password can only
be made up of six (6) numbers.
TOP TIP:
This is commonly called the engineers password and will get you access to configure the VTH later on.
The user password is default 123456, this will get you access to change some basic settings like ring volume, time and date.
TOP TIP:
If the settings button is only pressed and not held, entering the password 123456 will enter the user settings rather than the
engineer settings
To configure the VTH unit, use the built-in menu within the monitor itself. VTH units do not support web browser configuration.
INITIALISATION OF A VTH
CONFIGURATION OF A VTH