COP DAHUA DHI-VTH2421FW-P, Инструкция по установке

Страница: 11 / 16

11
If you have VTO4202F modular system, the main configuration of the VTO is the same as is shown on page 7.
To add modules such as a Keypad and or Card Reader to your VTO you will need to log into the VTO and navigate to Local Settings
– Basic- Façade Layout – click Add
Once you have added a new module for example a Keypad and or a Card Reader you may wish to add a security code to open
any doors without a Card.
Adding a Security Code navigate to Local Settings – Access Control – Local and Enable then enter your access control code and
confirm this, then click Save .
To use the code programmed you must use a # both before and after the code.
Example #1234#
ADDING AN EXTRA MODULE