Conway MT 2018, Руководство пользователя

Страница: 79 / 100

79
Other components
• To lock the suspension fork, turn the control knob 90°
clockwise or press the lock-out button.
• To unlock the suspension fork, turn the control knob 90°
anti-clockwise or press the unlock button.
note: Even when locked, the suspension system still provides
cushioning on uneven surfaces of up to 15 mm.
9.8.1.7 adjusting mechanic suspension
• Remove the protective dust
cap from each immersion
tube by pulling it upwards
in a vertical direction.
• In order to increase
suspension preload,
use a coin to turn the
control knob on top of
the immersion tube
towards the “+” sign
(see Fig. “Suspension
preload” ).
• In order to decrease suspension preload, use a coin to turn
the control knob on top of the immersion tube towards the
“ - ” sign.
• Make sure that the suspension preload is adjusted to the
same level on both sides.
• Consult your specialist dealer if you are unsure about how
to adjust the suspension preload.
Fig.: Suspension preload
1 Protective dust cap
2 Adjusting dial
1
2
9.8.1.8 adjusting pneumatic suspension
noTiCe
Damage to the suspension system caused by incorrectly
adjusted dampers.
Risk of damage!
• Ask your specialist dealer to adjust the pneumatic
dampers.
Special expertise are required to correctly adjust pneumatic
suspension forks.
If you already have experience of adjusting pneumatic suspension
systems and want to adjust the suspension yourself:
• use a suitable air pump
• read the manufacturer’s documentation to find out about
permissible air pressure levels.
9.8.1.9 Suspension fork travel
To reduce suspension travel distance:
1. Push the button labelled “Push” and hold it down
(see Fig. “Suspension travel” ).
2. Press down on the handlebars from above.
The fork will dip down. The further the fork sinks down, the shorter
the suspension travel distance will be.