Conway MT 2018, Руководство пользователя

Страница: 56 / 100

56
Gear shift system
7.2.2.2 Changing gears with a twist grip shifter
Turn the twist grip shifter to change gears (see Fig. “Twist grip
shifter for gear hubs” ).
Fig.: Twist grip shifter for gear hubs (example)
7.2.3 Settings
• If the effectiveness of the gear hub reduces, adjust the gear
cable tension.
The adjustment of the gear cable tension is done independently
of your gear hub.
7.2.3.1 Gear hub with three gears
1. Put the bike into the second gear (see Chapter “Operation”
on page 55 ).
2. Unscrew the counter nut on the right-hand side of the rear
wheel on the gear hub housing (see Fig. “‘Nexus’ settings” ).
3. Turn the knurled nut in such a way that the marking in the
window lies exactly between the lines or arrows.
4. Tighten the counter nut.
• Carefully tighten the counter nut.
Fig.: “Nexus” settings
1 Knurled nut
2 Counter nut 3 Marking
S
ET
S
ET
2 1
3
7.2.3.2 Gear hub with seven gears
1. Use the gear lever to shift to the 4th gear
(see Fig. “Twist grip shifter for gear hubs” ).
The adjustment screw can be found underneath the handlebar.
2. Turn the pedal crank slightly.
3.
Move the adjustment screw on the twist grip handle in such a
way that both yellow markings are aligned on the rear wheel
hub (see Fig. “Markings on the rear wheel hub” ).