Conway MT 2018, Руководство пользователя

Страница: 19 / 100

19
Basic information
4.2.2 Screws
• Do not use the following torques for components that have
been made of aluminium or carbon.
• Do not use the following torques for the handlebar stem,
the brake, the bottom bracket or the gear shift.
• Use the following torques only if you know the strength
category of the relevant screws.
Thread Torque according to the strength category
of the screws in Nm
8.8 10.9 12.9
M4 2.7 3.8 4.6
M5 5.5 8.0 9.5
M6 9.5 13.0 16.0
M8 23.0 32.0 39.0
M10 46.0 64.0 77.0
4.3 Direction of rotation for screws
• Tighten screws, axles and nuts by turning them in a clockwise
direction.
note: If there are any deviations to this rule, a note will be
included in the appropriate chapter, indicating the change in
direction. Please observe the respective notes.
4.4 Sitting position
CauTion
Muscle tension and joint pain due to an incorrectly
adjusted sitting position.
Risk of injury!
• Ask your specialist dealer to adjust your sitting position
correctly.
CauTion
Limited accessibility to operating controls on the
handlebar due to an incorrect sitting position.
Risk of accident and injury!
• Ask your specialist dealer to adjust your sitting position
correctly.
The optimal sitting position depends on the frame size of the bicycle,
the physical size of the rider and the settings of the handlebars and
the seat. Specialist knowledge is required to adjust the bicycle to
an optimal sitting position.
The optimal sitting position can also depend on the use of the
bicycle, e.g. if it is predominantly used for sports.