Conway MT 2018, Руководство пользователя

Страница: 54 / 100

54
Gear shift system
7.2.1.2 eccentric chain tensioner
Depending on the bicycle model, an eccentric chain tensioner may
be installed. Compare Figures “Eccentric chain tensioner A” and
“Eccentric chain tensioner B”, to determine which type is installed
on your bicycle.
If you do not have the necessary expertise or correct tools to adjust
the chain using the eccentric chain tensioner, you should ask your
specialist dealer to adjust it for you.
1.
Loosen the clamp screw or the three clamp screws on the left
side of your bicycle when seen from the direction of travel
(see Figures “Eccentric chain tensioner A” or “Eccentric chain
tensioner B” ).
2. Insert a hooked tool, e.g. an Allen wrench into the adjusting
hole or into both adjusting holes.
3. Turn the eccentric chain tensioner towards the rear wheel to
reduce chain tension.
4. Turn the eccentric chain tensioner towards the front wheel to
increase chain tension.
Once you have correctly adjusted the chain tension, re-tighten
the clamp screw / three clamps screws.
5. Check the chain tension.
Fig.: Eccentric chain tensioner A
1 Adjusting holes 2 Clamp screw
1
2
Fig.: Eccentric chain tensioner B
1 Adjusting hole 2 Clamp screws
1
2