Conway MT 2018, Руководство пользователя

Страница: 17 / 100

17
Basic information
4 Basic information
4.1 Symbols and terms
4.1.1 Symbols
1. Steps to be performed in a particular order begin with a
number.
• Steps to be performed in no particular order begin with a
dot.
–
Dashes are used to denote lists.
note: Supplementary notes regarding steps to be performed or
use.
4.1.2 Terms
Dynamo: The term “dynamo” is used to refer to a magnet-based
generator that is used to power bicycle lighting.
Threadless handlebar stem: The term “threadless handlebar
stem” is used to differentiate from quill stems.
Dropout:
Connection between the rear frame seat stay and the
rear frame chain stay. The rear wheel’s axle is tightly screwed into
the dropout.
Brake arm: Contrary to the norm, the term ‘brake arm’ is used
to describe the lever installed on the rear frame chain stay as a
bracket for the coaster brake.
Brake lever:
Contrary to the norm, the term ‘brake lever’ refers
to the lever attached to the handlebars that is used to operate the
rim brakes, drum brakes and disc brakes.
Pressure point (hydraulic brake): The position of the brake
lever at which the brake begins to have a braking effect.
Lock-out: Mechanism to lock the suspension fork in place.
Pedal drive: Assembly consisting of pedals, pedal crank, bottom
bracket and chainring.
Sag:
The compression of the suspension system that takes
place simply as a result of the rider’s bodyweight.
Fig.: Pedal drive
1 Chainring
2 Bottom bracket 3 Pedal
4 Pedal crank
3
2
1
4
4.1.3 Written labels
Italic
font is used for picture captions and references in the text.