Conway MT 2018, Руководство пользователя

Страница: 23 / 100

23
Basic information
WaRninG
After cycling the first kilometres, cables and spokes may
elongate and screwed connections may loosen.
The components of the bicycle may malfunction, e.g. in
the form of brake failure.
Risk of accident and injury!
• Make sure that a bicycle inspection is carried out by a
specialist dealer after the first 200 km.
WaRninG
Material failure caused by use-related wear and loose
screw connections.
Risk of accident and injury!
• Check your bicycle before each ride, following the
inspection instructions.
• If in any doubt, ask your specialist dealer to show you
how to check your bicycle.
• Only use the bicycle if no damage is visible.
• Only use the bicycle, if you cannot see any signs
of excessive wear and cannot find any loose screw
connections.
Your bicycle has been fully assembled and adjusted by your
specialist dealer; it is now ready to ride.
Ensure that you are well acquainted with your bicycle before your
first ride.
•
If you have hydraulic brakes, apply both brake levers
multiple times to centre the brake pads in the brake calliper.
• Accustom yourself to the way the bicycle rides away from
road traffic.
• If you find that the location of the brake lever for the front
wheel or rear wheel brake is unfamiliar to you, you can ask
your specialist dealer to reposition them for you.
• Ride in an off-road location and at a low speed in order to
familiarise yourself with the braking characteristics of your
own types of brakes (see Chapter “Brakes” on page 26 ).
• Ride in an off-road location to practice using the gear shift
system until you can change gears without it causing a
distraction.
• For longer rides you should also check if you are in a
comfortable sitting position and that you are able to safely
operate all components located on the handlebars with ease
while riding.