Conway MT 2018, Руководство пользователя

Страница: 36 / 100

36
Brakes
noTiCe
Damage to the brakes caused by dismounting the
front or rear wheel.
Risk of damage!
• If you do not have the necessary expertise and the
required tools, you should ask your specialist dealer
to mount or dismount the front or rear wheel for you.
noTiCe
Full application of the brakes with new brake pads can
cause the brake pads to vitrify.
Risk of damage!
• Break in new discs away from road traffic.
5.4.1 Basic information
When the brake lever is operated, the brake pistons within the brake
callipers are pushed outwards. The brake pads are pushed against
the brake discs by the brake pistons.
• Check the disc brakes regularly for signs of wear and proper
functioning.
• Remove dirt from the brake components and the brake discs
immediately with a slightly dampened cloth.
• If you have disc brakes, clean the brake discs regularly with
brake cleaning fluid or warm water.
Using disc brakes causes wear and tear to the brake pads and
the brake discs.
The cable can also become worn in disc brakes operated by a
brake cable.
In the case of hydraulic disc brakes, the brake fluid can also
become damaged through use.
Fig.: Hydraulic disc brake
1 Hydraulic lines
2 Brake calliper 3 Brake disc
1
2
3
Ask your specialist dealer for an inspection aid to help check for
signs of wear and tear in the brake pads. Depending on the type of
your brakes, this may be the transport safety device, for example.
• Follow all the instructions listed below for the front and rear
brakes.
1. Verify that the brake pads move backwards and forwards
in an even and symmetrical manner towards the brake disc
when you pull and release the brake lever.
•
If you can move the brake disc or if the brake pads move
in an uneven fashion, have the brakes checked by your
specialist dealer.