Convaid YoYo, Руководство пользователя

Страница: 31 / 44

31
ACCESSORIES & OPTIONS
Laterals
To Adjust:
1. Remove Back Cushion. FIG.67
2. Using 5/32” Allen-wrench key and 7/16 wrench, loosen the hardware and adjust up to add height
or down to reduce height.
3. Retighten the hardware.
To Re-locate Tilt Cable:
1. Using 5/32” Allen-wrench key and 7/16
wrench, loosen the hardware.
2. For min. lateral range move tilt cable
bracket up at least 3 slot. FIG. 69 & 70
1. Remove Back Cushion. FIG.71
2. Remove bolt and washer from back pan. FIG.72
3. Attach lateral support and insert bolt for desired height hole on height
adjustable back. FIG.73
4. Using 5/32” Allen-wrench key and 7/16 wrench, tighen the hardware
5. Repeat on opposite side.
To Remove:
1. Remove Back Cushion. FIG.67
2. Use 7/16” wrench to loosen hardware. FIG.68
3. Loosen button head bolt and washer from height adjustable back. FIG.70
4. Repeat on opposite side.
25
ACCESSORIES
To Adjust:
1. Remove Back Cushion.
Fig. 81
2. Using 5/32” L-wrench key and 7/16 wrench driver,
loosen the hardware and
adjust hard ware as needed to provide user with
adequate trunk support
3. Retighten the hardware
Fig. 82
Laterals
Fig. 81 Fig. 82
Fig. 85 Fig. 83 Fig. 84
Note: To adjust lat-
eral height down to
minimum range,
remove the cable
bracket using a
5/32” L wrench key
and 7/16 wrench
driver and re-attach
with laterals, with-
out washer.
Note: DO NOT USE center slot
To Remove:
1. Remove Back Cushion.
2. Use 7/16” wrench driverto loosen hardware.
3. Loosen button head bolt and washer from height adjustable back.
4. Repeat on opposite side.
To Install:
1. Remove Back Cushion. Fig. 83
2. Remove bolt and washer from back pan. Fig. 84
3. Attach lateral support and insert bolt for desired
height hole on height
adjustable back. Fig. 85 .
4. Using 5/32” L-wrench key and 7/16 wrench
driver, tighen the hardware
5. Repeat on opposite side
25
ACCESSORIES
To Adjust:
1. Remove Back Cushion.
Fig. 81
2. Using 5/32” L-wrench key and 7/16 wrench driver,
loosen the hardware and
adjust hard ware as needed to provide user with
adequate trunk support
3. Retighten the hardware
Fig. 82
Laterals
Fig. 81
Fig. 82
Fig. 85 Fig. 83 Fig. 84
Note: To adjust lat-
eral height down to
minimum range,
remove the cable
bracket using a
5/32” L wrench key
and 7/16 wrench
driver and re-attach
with laterals, with-
out washer.
Note: DO NOT USE center slot
To Remove:
1. Remove Back Cushion.
2. Use 7/16” wrench driverto loosen hardware.
3. Loosen button head bolt and washer from height adjustable back.
4. Repeat on opposite side.
To Install:
1. Remove Back Cushion.
Fig. 83
2. Remove bolt and washer from back pan.
Fig. 84
3. Attach lateral support and insert bolt for desired
height hole on height
adjustable back.
Fig. 85
.
4. Using 5/32” L-wrench key and 7/16 wrench
driver, tighen the hardware
5. Repeat on opposite side
25
ACCESSORIES
To Adjust:
1. Remove Back Cushion.
Fig. 81
2. Using 5/32” L-wrench key and 7/16 wrench driver,
loosen the hardware and
adjust hard ware as needed to provide user with
adequate trunk support
3. Retighten the hardware
Fig. 82
Laterals
Fig. 81 Fig. 82
Fig. 85 Fig. 83 Fig. 84
Note: To adjust lat-
eral height down to
minimum range,
remove the cable
bracket using a
5/32” L wrench key
and 7/16 wrench
driver and re-attach
with laterals, with-
out washer.
Note: DO NOT USE center slot
To Remove:
1. Remove Back Cushion.
2. Use 7/16” wrench driverto loosen hardware.
3. Loosen button head bolt and washer from height adjustable back.
4. Repeat on opposite side.
To Install:
1. Remove Back Cushion.
Fig. 83
2. Remove bolt and washer from back pan.
Fig. 84
3. Attach lateral support and insert bolt for desired
height hole on height
adjustable back.
Fig. 85
.
4. Using 5/32” L-wrench key and 7/16 wrench
driver, tighen the hardware
5. Repeat on opposite side
FIG.69
FIG.67 FIG.68
FIG.70
FIG.71
FIG.72
FIG.73
Height Adjustment
Width Adjustment:
MAX
MIN
Tilt Cable Bracket
First Slot