Convaid YoYo, Руководство пользователя

Страница: 30 / 44

CONVAID USER’S GUIDE
30
Universal Bracket Installation Instruction
Adjustable Headwing headrest Instructions
FIG.65
FIG.66
1. Unzip the cover from the back of the headrest.
2. Slightly move the cover to reveal the silver
locking screw on the plastic headrest plate.
3. Note that the locking screw of the right hand
side is on the top portion of the pivot hinge.
The locking screw of the left hand side is on the
bottom portion of the pivot hinge.
4. Using a 5/32” allen wrench, loosen the screw.
5. Rotate the adjustable wings of the headrest to
the desired location.
6. Use a 5/32” allen wrench to tighten screw.
7. Repeat steps 4 to 6 for the other side.
1. Insert screw into one of the four holes on the
upper portion of the back pan.
2. Attach two thick nylon washers prior to attaching
the universal plate.
3. Orient the universal plate to match the holes of
the headrest hardware.
4. Partially thread the screw onto the plate but do
not tighten.
5. Repeat steps 1 to 3 for the other three
attachment screws.
6. Using a 5/32” allen wrench, tighten all four
attachment screws.